home *** CD-ROM | disk | FTP | other *** search
- Path: shellx.best.com!usenet
- From: Rigor@clever.net (Matt Fox)
- Newsgroups: comp.dcom.modems
- Subject: Re: USR Sportster 33.6 Ext. Problems
- Date: 4 Jan 1996 09:02:59 GMT
- Organization: Best Internet Communications
- Message-ID: <4cg543$sfa@shellx.best.com>
- References: <4c6mpb$3ic6@yuma.ACNS.ColoState.EDU> <4cf358$kla@useneta1.news.prodigy.com>
- NNTP-Posting-Host: belvdere.vip.best.com
- X-Newsreader: WinVN 0.99.5
-
- In article <4cf358$kla@useneta1.news.prodigy.com>, davidsen@tmr.com says...
- >
- >In article <4c6mpb$3ic6@yuma.ACNS.ColoState.EDU>,
- >James Tige Richardson <tige@holly.colostate.edu> wrote:
- >
- >| 2. After turning on the modem I must go to a terminal mode and issue
- >| the ATZ command before dialing. If I try to dial first via
- >| Hyperterminal, my PPP account, or AOL, Win 95 reports that the
- >| modem is not responding to commands. After I reset, it seems to
- >| work ok.
- >
- >If power cycle doesn't do the same thing as ATZ I think you have a
- >hardware problem. I've seen a few cases where ATZ didn't do the job
- >(my early Sportster V.34's), but not the other way round.
- >--
- > -bill davidsen (davidsen@tmr.com)
-
- instead of ATZ, try ats13=128, it does a complete hardware reset.
-
-